Stainless Steel Plate| YEOU YIH STEEL-Stainless Steel Thick Plate Manufacturer

Stainless Steel Product

Product	Hot Rolled Stainless Steel Plate 304、304H、304L、316L
Finish Surface	NO.1 Finished The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling
Thickness	8mm ~ 60mm
Width	1000mm ,1219mm,1500mm 1524mm,2000mm,2438mm
Length	2000mm,2438mm,3048mm,3658mm 4000mm,4876mm,6096mm
Specification	Americ: ASTM A240,ASME SA240 Japan: JIS G4304 EN10088-2 ,CPR EN10088-4,EN10028-7 Ship: DNV

Please contact with sales department if you have special requirement

Chemical Composition

	Specification		Type	Steel Grade	Chemical Composition (%）
	Specification		Type	Steel Grade	C Max.	Si Max.	Mn Max.	P Max.	S Max.	Cr	Ni	Mo	Ｎ Max.	Cu Max.	Others
AMERICA	ASTM A240	◎	304	S30400	0.08	0.75	2.00	0.045	0.030	18.0-20.0	8.0-11.0		0.10
		◎	304L	S30403	0.03	0.75	2.00	0.045	0.030	18.0-20.0	8.0-12.0		0.10
		〇	304H	S30409	0.04-0.10	0.75	2.00	0.045	0.030	18.0-20.0	8.0T0.5
		〇	316	S31600	0.08	0.75	2.00	0.045	0.030	16.0-18.0	10.0-14.0	2.00-3.00	0.10
		◎	316L	S31603	0.03	0.75	2.00	0.045	0.030	16.0-18.0	10.0-14.0	2.00-3.00	0.10
			310S	S31008	0.08	1.50	2.00	0.045	0.030	24.0-26.0	19.0-22.0
			321	S32100	0.08	0.75	2.00	0.045	0.030	17.0-19.0	9.0-12.0		0.10		Ti:Min.5*(C+N) Max. 0.07
JAPAN	JIS G4304		SUS 304	SUS304	0.08	1.00	2.00	0.045	0.030	18.00-20.00	8.00-10.50
			SUS 304L	SUS304L	0.03	1.00	2.00	0.045	0.030	18.00-20.00	9.00-13.00
			SUS 316	SUS316	0.08	1.00	2.00	0.045	0.030	16.00-18.00	10.00~14.00	2.00-3.00
			SUS 316L	SUS316L	0.03	1.00	2.00	0.045	0.030	16.00~18.00	12.00-15.00	2.00-3.00
			SUS 310S	SUS310S	0.08	1.50	2.00	0.045	0.030	24.00-26.00	19.00'22.00
			SUS 321	SUS321	0.08	1.00	2.00	0.045	0.030	17.00-19.00	9.00-13.00				Ti： Min. 5*C%
EUROPE	EN10088-2 EN10028-7	〇	X5CrNi18-10	1.4301(304)	0.07	1.00	2.00	0.045	0.015	17.5-19.5	8.0-10.5		0.10
			X2CrNi19-11	1.4306(304L)	0.030	1.00	2.00	0.045	0.015	18.0-20.0	10.0-12.0		0.10
		〇	X2CrNi18-9	1.4307(304L)	0.030	1.00	2.00	0.045	0.015	17.5-19.5	8.0-10.5		0.10
		〇	X6CrNi18-10	1.4948(304H)	0.04-0.08	1.00	2.00	0.035	0.015	17.0-19.0	8.0-11.0		0.10
			X6CrNi25-20	1.4951(310S)	0.04-0.08	0.70	2.00	0.035	0.015	24.0~26.0	19.0-22.0		0.10
			X5CrNiMo17-12-2	1.4401(316)	0.07	1.00	2.00	0.045	0.015	16.5-18.5	10.0-13.0	2.00-2.50	0.10
			X2CrNiMo17-l2-2	1.44O4(316L)	0.030	1.00	2.00	0.045	0.015	16.5-18.5	10.0-13.0	2.00-2.50	0.10
			X6CrNiTi18-10	1.4541(321)	0.08	1.00	2.00	0.045	0.015	17.0-19.0	9.0-12.0				Ti: (5*C)~0.70
◎:YYS Standard Production					Available Production

Mechanical Property

	Specification	Mechanical Property
	Specification	Type	Steel Grade	Tensile Stress (Min.)	0.2% Y.S. (Min.)	1% Y.S. （Min.）	Elongation (Min.)	HRB Hardness (Max.)	Impact KV J ( Min.)
AMERICA	ASTM A240	304	S30400	75Ksi / 515MPa	30Ksi / 205MPa		40%	92
		304L	S30403	70Ksi / 485MPa	25Ksi / 170MPa		40%	92
		304H	S30409	75Ksi / 515MPa	30Ksi / 205MPa		40%	92
		316	S31600	75Ksi / 515MPa	30Ksi / 205MPa		40%	95
		316L	S31603	70Ksi / 485MPa	25Ksi /170MPa		40%	95
		310S	S31008	75Ksi / 515MPa	30Ksi / 205MPa		40%	95
		321	S32100	75Ksi / 515MPa	30Ksi / 205MPa		40%	95
JAPAN	JIS G4304	SUS 304	SUS304	520 N/mm2	205 N/mm2		40%	90
		SUS 304L	SUS304L	480 N/mm2	175 N/mm2		40%	90
		SUS 316	SUS316	520 N/mm2	205 N/mm2		40%	90
		SUS 316L	SUS316L	480 N/mm2	175 N/mm2		40%	90
		SUS 310S	SUS310S	520 N/mm2	205 N/mm2		40%	90
		SUS 321	SUS321	520 N/mm2	205 N/mm2		40%	90
EUROPE	EN10088-2	X5CrNil8-10	1.4301(304)	540-720 MPa	230 MPa	260 MPa	45%		60
		X2CrNi19-11	1.4306(304L)	520-700 MPa	220 MPa	250 MPa	45%		60
		X2CrNi18-9	1.4307(304L)	520-700 MPa	220 MPa	250 MPa	45%		60
		X6CrNi18-10	1.4948(304H)	530-710 MPa	230 MPa	260 MPa	45%		60
		X6CrNi25-20	1.4951(310S)	530-710 MPa	220 MPa	250 MPa	35%		60
		X5CrNiMo17-l2-2	1.4401(316)	530-670 MPa	240 MPa	270 MPa	45%		60
		X2CrNiMo17-12-2	1.4404(316L)	530-670 MPa	240 MPa	270 MPa	45%		60
		X6CrNiTi18-10	1.4541(321)	520-700 MPa	220 MPa	250 MPa	40%		60

Area	Specification Standard	Dimensions	Dimensions(mm)	Tolerances (mm)
				Lower	Upper
AMERICA	ASTM A480 / ASME SA480	Thickness (mm) (Width : 4 Feet/ 5 Feet )	4.76≦T<9.52	-0.25	+1.14
			9.52≦T<19.05		+1.40
			19.05 ≦T<25.4		+1.52
			25.4≦T<50.80		+1.78
			50.8≦T<76.2		+3.20
			76.20≦T<101.6		+3.81
			101.6 ≦T<152.4		+4.57
		Thickness (mm) (Width : 8 Feet)	4.76≦T<9.52	-0.25	+1.27
			9.52≦T<19.05		+1.52
			19.05≦T<25.4		+1.65
			25.4≦T<50.80		+1.90
			50.8≦T<76.2		+3.80
			76.20≦T<101.6		+4.06
		Width (mm)	W≦2135	-6.35	+15.9
			2135	-6.35	+4.06
		Length (mm)	L<4064	-6.35	+19.1
			4064≦L<6096	-6.35	+31.8
			6096≦L<8000	-6.35	+41.3
		Flatness (mm)	6.35≦T<9.52	9.5mm
			9.52≦T<12.7	7.9mm
			12.7≦T<19.05	7.9mm
			19.05≦T<25.4	7.9mm
			25.4≦T<38.1	6.4mm
			38.1≦T<101.6	6.4mm
			101.6≦T	6.4mm
	Flat Bars Cut from Strip or Plate ASTM A484 / ASME SA484	Thickness (mm)	4.80≦T<9.00	-0.25	+1.25
			9.00≦T<19.00		+1.50
			19.00≦T<25.00		+1.65
			25.00≦T<50.00		+1.90
			50.00≦T<75.00		+3.80
			75.00≦T<100.00		+5.30
			100.00≦T<150.00		+7.60
		Width (mm) (WSIOOmm )	4.80≦T<9.00	-0.80	+2.40
			9.00≦T<19.00		+2.40
			19.00≦T<25.00		+2.40
			25.00≦T<50.00		+2.40
			50.00≦T<75.00		+3.00
			75.00≦T<100.00		+3.00
			100.00≦T<150.00		+3.00
		Width (mm) (W三 100mm )	4.80≦T<9.00	-2.40	+2.40
			9.00≦T<19.00	-2.40	+2.40
			19.00≦T<25.00	-2.40	+2.40
			25.00≦T<50.00	-2.40	+2.40
			50.00≦T<75.00	-3.00	+3.00
			75.00≦T<100.00	-3.00	+3.00
			100.00≦T<150.00	-3.00	+3.00
		Length (mm)	4.80≦T<9.00	0	+4.80
			9.00≦T<19.00	0	+4.80
			19.00≦T<25.00	0	+4.80
			25.00≦T<50.00	0	+4.80
			50.00≦T<75.00	0	+6.50
			75.00≦T<100.00	0	+6.50
			100.00≦T<150.00	0	+6.50
		Straightness	3.00 mm in any 1.50 M but may exceed 3.00 mm *(Length (M) /1.5)

Area	Specification Standard	Dimensions	(mm) Dimensions	Tolerances (mm)
Area	Specification Standard	Dimensions	(mm) Dimensions	Lower	Upper
EUROPE	EN 10029	Thickness (mm) CLASS A	8≦T<15	-0.5	+1.2
			15≦T<25	-0.6	+1.3
			25≦T<40	-0.8	+1.4
			40≦T<80	-1.0	+1.8
			80≦T<150	-1.0	+2.2
		Thickness (mm) CLASS B	8≦T<15	-0.3	+1.4
			15≦Tv25		+1.6
			25≦T<40		+1.9
			40≦T<80		+2.5
			80≦T<150		+2.9
		Thickness (mm) CLASS C	8≦T<15	0	+1.7
			15≦T<25		+1.9
			25≦T<40		+2.2
			40≦T<80		+2.8
			80≦T<150		+3.2
		Thickness (mm) CLASS D	8≦T<15	-0.85	+0.85
			15≦T<25	-0.95	+0.95
			25≦T<40	-1.1	+1.1
			40≦T<80	-1.4	+1.4
			80≦T<150	-1.6	+1.6
		Maximum thickness difference within a plate (W<2000)	8≦T<15	0.9 mm
			15≦T<25	1.0 mm
			25≦T<40	1.1 mm
			40≦T<80	1.2 mm
			80≦T<150	1.3 mm
		width(mm)	600	0	+20
		width(mm)	2000	0	+25
		width(mm)	L<4000	0	+20
			4000≦L<6000	0	+30
			6000≦L<8000	0	+40
		Flatnou CLASS N Stool Typo H Measuring Length 1M	8≦T<15	7 mm
			15≦T<25	7 mm
			25≦T<40	6 mm
			40≦T<80	5 mm
		Flatnou CLASS N Stool Typo H Measuring Length 2M	8≦T<15	10 mm
			15≦T<25	10 mm
			25≦T<40	9 mm
			40≦T<80	8 mm
		Flatnou CLASS N Stool Typo H Measuring Length 2M	8≦T<250	3 mm
		Flatnou CLASS N Stool Typo H Measuring Length 2M	8≦T<250	6 mm

Area	Specification Standard	Dimensions	Dimensions (mm)		Tolerances (mm)
					Lower	Upper
JAPAN	JIS G4304 / CNS 8497 ; G3163 符號 Mark A	Thickness (mm) (Width : 4 Feet / 5 Feet )	8.0≦T<10		-0.65	+0.65
			10.0≦T<16		-0.70	+0.70
			16.0≦T<25		-0.08	+0.80
			25.0≦Tv40		-0.90	+0.90
			40.0≦T<63		-1.20	+1.20
			63.0≦T<100		-1.30	+1.30
		Thickness (mm) (Width : 8 Feet)	8.0 ≦T<10		-0.80	+0.80
			10.0≦T<16		-0.85	+0.85
			16.0≦T<25		-0.95	+0.95
			25.0≦T<40		-1.10	+1.10
			40.0≦Tv63		-1.20	+1.20
			63.0≦Tv100		-1.30	+1.30
	JIS G4304 / CNS 8497 ; G3163 Mark Ｂ	Thickness (mm) (Width : 4 Feet / 5 Feet )	8.0≦T<10		-0.25	+1.05
			10.0≦T<16			+1.15
			16.0≦T<25			+1.35
			25.0≦T<40			+1.55
			40.0≦T<63			+2.15
			63.0≦T<100			+2.35
		Thickness (mm) (Width : 8 Feet)	8.0≦T<10		-0.25	+2.15
			10.0≦T<16			+2.15
			16.0≦T<25			+2.35
			25.0≦T<40			+2.35
			40.0≦T<63			+2.55
			63.0≦T<100			+2.75
	JIS G4304 / CNS 8497 ; G3163	wldth(mm) W<2000mm	Machhe Cutting	<10mm	0	20
				10≦T<20	0	20
			Plasma Cutting	20.0≦T<28	0	20
				25.0≦T<100	+5	+55
		width(mm) W>2000mm	Machhe Cutting	<10mm	0	+25
				10≦T<20	0	+25
			Plasma Cutting	20.0≦T<28	0	+25
				25.0≦T<100	+5	+60
		Length(mm) W<2000mm	Machhe Cutting	<10mm	0	+30
				10≦T<20	0	+35
			Plasma Cutting	20.0≦T<28	0	+35
				25.0≦T<100	+5	+60
		Length(mm) W>2000mm	Machhe Cutting	<10mm	0	+35
				10≦T<20	0	+40
			Plasma Cutting	20.0≦T<28	0	+40
				25.0≦T<100	+5	+60
		Flatness	W : 4 Feet / 5 Feet Max.		20 mm
			W : 8 Feet Max.		40 mm
			Mark EF (Maxlum)		6 mm

Theoretic Weight Tablel

Steel Grade: 304、304L、304H

Thickness mm	Size Unit:kg
	4'x8'	4' x 10'	4' x 16'	4' x 20'	5' x 10'	5' x 20'	8' X 20'
	1219mm x 2438mm	1219mm x 3048mm	1219mm x 4876mm	1219mm x 6096mm	1524mm x 3048mm	1524mmx 6096mm	2438mmx 6096mm
7	165	206	330	412	258	516	825
8	189	236	377	471	295	589	943
9	212	265	424	530	332	663	1061
10	236	295	471	589	368	737	1179
11	259	324	519	648	405	810	1296
12	283	354	566	707	442	884	1414
13	306	383	613	766	479	958	1532
14	330	412	660	825	516	1031	1650
15	354	442	707	SS4	553	1105	1768
16	377	471	754	943	589	1179	1886
17	401	501	801	1002	626	1252	2004
18	424	530	848	1061	663	1326	2121
19	448	560	896	1120	700	1400	2239
20	471	589	943	1179	737	1473	2357
21	495	619	990	1237	774	1547	2475
22	518	648	1037	1296	810	1621	2593
23	542	678	1084	1355	847	1694	2711
24	566	707	1131	1414	884	1768	2829
25	589	737	1178	1473	921	1842	2946
28	660	825	1320	1650	1031	2063	3300
30	707	884	1414	1768	1105	2210	3535
32	754	943	1508	1886	1179	2358	3771
35	825	1031	1650	2062	1289	2579	4125
38	896	1120	1791	2239	1400	2800	4479
40	943	1179	1885	2357	1473	2947	4714
42	990	1237	1980	2475	1547	3094	4950
45	1061	1326	2121	2652	1658	3315	5304
48	1131	1414	2263	2829	1768	3536	5657
50	1178	1473	2357	2946	1842	3684	5893
55	1296	1621	2592	3241	2026	4052
60	1414	1768	2828	3536	2210	4420

Steel Grade: 316、316L

Thickness mm	Size Unit:kg
	4'x8'	4' x 10'	4' x 16'	4' x 20'	5' x 10'	5' x 20'	8' X 20'
	1219mm x 2438mm	1219mm x 3048mm	1219mm x 4876mm	1219mm x 6096mm	1524mm x 3048mm	1524mmx 6096mm	2438mmx 6096mm
7	166	208	332	415	259	519	830
8	190	237	379	474	297	593	949
9	213	267	427	534	334	667	1067
10	237	296	474	593	371	741	1186
11	261	326	522	652	408	816	1305
12	285	356	569	712	445	890	1423
13	308	385	617	771	482	964	1542
14	332	415	664	830	519	1038	1660
15	356	445	711	889	556	1112	1779
16	379	474	759	949	593	1186	1898
17	403	504	806	1008	630	1260	2016
18	427	534	854	1067	667	1334	2135
19	451	563	901	1127	704	1409	2253
20	474	593	949	1186	741	1483	2372
21	498	623	996	1245	778	1557	2491
22	552	652	1044	1305	816	1631	2609
23	545	682	1091	1364	853	1705	2728
24	569	712	1138	1423	890	1779	2846
25	593	741	1186	1482	927	1853	2965
28	664	830	1328	1660	1038	2076	3321
30	711	889	1423	1779	1112	2224	3538
32	759	949	1518	1898	1186	2372	3795
35	830	1038	1660	2075	1297	2595	4151
38	901	1127	1802	2253	1409	2817	4507
40	949	1186	1897	2372	1483	2965	4744
42	996	1245	1992	2491	1557	3114	4981
45	1067	1334	2134	2668	1668	3336	5337
48	1138	1423	2277	2846	1779	3559	5693
50	1186	1482	2372	2965	1853	3707	5930
55	1304	1631	2609	3261	2039	4078
60	1423	1779	2846	3558	2224	4448

Back to list

Stainless Steel Product

Stainless Steel Product

Information

Chemical Composition & Mechanical Property

Dimension Tolerance

Theoretic Weight Table

Recommend

Trading